Skip to main content

Getting Started with the McDATA Intrepid FICON Director

An IBM Redbooks publication

Note: This is publication is now archived. For reference only.


Published on 04 April 2003

  1. .PDF (3.3 MB)

Share this page:   

ISBN-10: 0738428426
ISBN-13: 9780738428420
IBM Form #: SG24-6857-00

Authors: Bill White, Wolfgang Fries and Manfred Lindenau

    menu icon


    This IBM Redbooks publication discusses how to install, tailor, and configure the McDATA Intrepid FICON Director, in conjunction with the FICON topologies supported by zSeries and 9672 Generation 5 and Generation 6 servers. It focuses on the hardware installation as well as the software definitions needed to provide connectivity for supported FICON environments.

    This book provides planning information and FICON Director setup information. Also included are helpful utilities for monitoring and managing the McDATA Intrepid FICON Director environment.

    This book is intended for system engineers, SAN administrators, and system programmers who will plan and install McDATA Intrepid FICON Directors. A good background in systems planning, hardware and cabling infrastructure planning, and zSeries I/O definitions (HCD or IOCP), as well as Fibre Channel or FICON Directors is assumed.

    Table of Contents

    Chapter 1. Introduction

    Chapter 2. Technical Description

    Chapter 3. Pre-installation planning

    Chapter 4. Setting up the EFC Manager environment

    Chapter 5. Configuring the FICON Director

    Appendix A. Useful procedures

    Appendix B. Port location and mapping

    Appendix C. FICON Director configuration worksheet


    Others who read this also read