Showing documents 1 to 5 of 53  Next

Results per page: 5 | 10 | 20


cover image

IBM FlashSystem 9100 Architecture, Performance, and Implementation
Flash storage

Draft Redbooks, last updated 6 Dec 2018

IBM® FlashSystem 9100 combines the performance of flash and Non-Volatile Memory Express (NVMe) with the reliability and innovation of IBM FlashCore® technology and the rich features of IBM Spectrum™ Virtualize — all in a powerful 2U storage system. Providing intensive data driven multi-cloud storage capacity, FlashSystem 9100 is deeply integrated with the software defined capabilities of IBM Spectrum Storage™ allowing you to easily add in the multi-cloud solutions that best support your business. In this book we discuss the product features, planning steps, architecture, installation, ... [more]


cover image

IBM DS8880 High-Performance Flash Enclosure Gen2
Flash storage

Redpaper, published 12 Oct 2018, last updated 4 Dec 2018

This IBM® Redpaper™ publication describes the IBM DS8880 High-Performance Enclosure (HPFE) Gen2 architecture and configuration, as of DS8880 Release 8.51. The DS8880 HPFE Gen2 is a 2U Redundant Array of Independent Disks (RAID) flash enclosure with associated Flash RAID adapters that can be used exclusively with DS8880 models. The flash enclosure and Flash RAID adapters are installed in pairs. Each storage enclosure pair can support 16, 32, or 48 encryption-capable flash drives (2.5-inch, 63.5 mm form ... [more]


cover image

IBM HyperSwap and Multi-site HA/DR for IBM FlashSystem A9000 and A9000R
Storage Solutions

Draft Redpaper, last updated 30 Nov 2018

IBM® HyperSwap® is the high availability (HA) solution that provides continuous data availability in case of hardware failure, power failure, connectivity failure, or disasters. The HyperSwap capability is available for IBM FlashSystem® A9000 and IBM FlashSystem A9000R, starting with software version 12.2.1. Version 12.3 introduces a function that combines HyperSwap and Asynchronous replication, creating a solution that entails both High Availability (HA) and Disaster Recovery (DR). One side of the HyperSwap pair has an active async link to the third system, and the other side has a standby ... [more]


cover image

IBM FlashSystem 9100 Product Guide
Flash storage

Draft Redpaper, last updated 20 Nov 2018

This IBM Redbooks® Product Guide describes IBM FlashSystem® 9100, which is a comprehensive all-flash, NVMe enabled, enterprise storage solution that delivers the full capabilities of IBM FlashCore® technology. In addition, it provides a rich set of software-defined storage features, including, data reductions including de-duplication, dynamic tiering, thin provisioning, snapshots, cloning, replication, data copy services, and IBM HyperSwap® for high availability. Scale out, scale up configurations further enhance not only the capacity but also the throughput, giving even better ... [more]


cover image

IBM FlashSystem A9000 and A9000R Business Continuity Solutions
Flash storage

Draft Redpaper, last updated 19 Nov 2018

This edition applies to FlashSystem A9000 and A9000R, Model 415 and 425, with system software Version 12.3 IBM® FlashSystem A9000 and IBM FlashSystem® A9000R provide copy functions suited for various data protection scenarios that enable you to enhance your business continuance, disaster recovery, data migration, and backup solutions. These functions allow point-in-time copies, known as snapshots, and also include remote copy capabilities in either synchronous or asynchronous mode. Furthermore, support for IBM Hyper-Scale Mobility enables a seamless migration of IBM FlashSystem A9000 or ... [more]


 Next

The above is a list of IBM Redbooks and Redpapers on Flash storage, showing most recently published first. Most of these publications are available in Adobe PDF format and may be viewed online or downloaded for offline viewing and printing. Read our How to buy page for details on how to order a bound hardcopy.



Follow IBM Redbooks

Follow IBM Redbooks