IBM

4.3 N7950T technical specifications at a glance

Table 4-2 provides the N7950T technical specifications.

Table 4-2 Summary of the specifications for the N7950T.

 
N7950T
System model
2867-E22
Height
12U
Weight
251.4 lbs (114 kg)
AC Power1
13.8A @100V
7A @200V
BTU/hr2
4540 @100V
4404 @200V
Controller configuration
Dual Active/Active with IOXM
Processor
4x 64-bit six core
Memory
192 GB
NVRAM
8 GB
Fibre Channel ports
8 - 32
8 Gb SFP+3
Exp Slots
24 PCIe
Ethernet ports
4x GbE RJ45
8x 10 GbE SFP+
SAS ports
0 - 24
6 Gb QSFP4
Max Capacity TB5
(7.3.x / 8.0.x / 8.1.x)
-/43206/43207
Number of disk drives
1440
Max Shelves
EXN3500 / EXN3000 / EXN4000
60/60/84
Max Aggregate8
(7.3.x / 8.0.x / 8.1.x)
-/100TB/162TB
Max FlexVol Size
(7.3.x / 8.0.x / 8.1.x)
-/100TB/100TB
Data ONTAP
(minimum release)
8.0.1, 8.1

1AC Power values shown are based on typical system values with two power supply units.

2Thermal dissipation values shown are based on typical system values.

3N7950T embedded Fibre Channel ports and Fibre Channel ports on the vertical FC system boards are considered on-board ports. They can be set as target or initiators and support operation at 2, 4, or 8 Gb speeds. Operation at 1 Gb speeds is not supported.

4The number of onboard SAS ports differs based on the configuration.

5System capacity is calculated using base 10 arithmetic (1TB=1,000,000,000,000 bytes) and is derived based on the type, size, and number of drives.

6Max capacity shown can be achieved only by using 3 TB drives under Data ONTAP 8.0.2 or greater.

7Max capacity shown can be achieved only by using 3 TB drives under Data ONTAP 8.0.2 or greater.

8Maximum aggregate size is calculated using base 2 arithmetic (1TB = 240 bytes).

For more information about N series 7000 systems, see the following website:

http://www.ibm.com/systems/storage/network/n7000/appliance/index.html


Redbooks
ibm.com/redbooks
Copyright IBM Corp. 2013. All rights reserved.