IBM

2.6 N3000 technical specifications at a glance

Table 2-4 shows the N3000 technical specifications at a glance.

Table 2-4 Summary of the specifications for the N3000 family.

 
N3220
N3220
N3240
N3240
N3400
N3400
System model
2857-A12
2857-A22
2857-A14
2857-A24
2859-A11
2859-A21
Height
2U
2U
4U
4U
2U
2U
Weight
50.4 lbs
(22.9 kg)
55.4 lbs
(25.2 kg)
102 lbs
(46.4 kg)
107.1 lbs
(48.7 kg)
66 lb. (29.9 kg) with drives
AC Power1
2.7A @100V 1.4A @200V
2.7A @100V 1.76A@200V
4.85A@100V 2.5A @200V
5.52A@100V 2.79A@200V
3.9A @100V 2A @200V
4.6A@100V 2.3A@200V
BTU/hr2
919 @100V 895 @200V
1215 @100V 1157 @200V
1646 @100V 1598 @200V
1861 @100V 1813 @200V
1319 @100V 1288 @200V
1558 @100V 1524@200V
Controller configuration
Single
Dual
Active/Active
Single
Dual
Active/Active
Single
Dual
Active/Active
Processor
1x 64-bit dual-core HT
2x 64-bit dual-core HT
1x 64-bit dual-core HT
2x 64-bit dual-core HT
1x 32-bit dual-core
2x 32-bit dual-core
Memory
63
12
64
12
4
8
NVMEM
768 MB
1.5 GB
768 MB
1.5 GB
512 MB
512 MB
Fibre Channel ports
0-2
8 Gb SFP+
0-4
8 Gb SFP+
0-2
8 Gb SFP+
0-4
8 Gb SFP+
4
4 Gb SFP
2
4 Gb SFP
Exp Slots
1 mezzanine
2 mezzanine
1 mezzanine
2 mezzanine
-
-
Ethernet ports
4 GbE RJ45
0-2 10 GbE
8 GbE RJ45
0-4 10 GbE
4 GbE RJ45
0-2 10 GbE
8 GbE RJ45
0-4 10 GbE
4 GbE RJ45
8 GbE RJ45
SAS Ports
2x
6 Gb QSFP
4x
6 Gb QSFP
2x
6 Gb QSFP
4x
6 Gb QSFP
1x
3 Gb QSFP
2x
3 Gb QSFP
Max Capacity TB5
(7.3.x / 8.0.x / 8.1.x)
- / - / 374
- / - / 432
136
136-4086
Number of disk drives
144x (24 internal + 120 external)
136x (12 internal + 124 external)
Max Shelves
EXN3500 / EXN3000 / EXN4000
5 / 5 / 6
4 / 4 / 8
Max Aggregate7
(7.3.x / 8.0.x / 8.1.x)
- / - / 60 TB
16-30-30
Max FlexVol Size
(7.3.x / 8.0.x / 8.1.x)
- / - / 60 TB
16-30-30
Data ONTAP
(minimum release)
8.1
7.3.2, 8.0, 8.1

1AC Power values shown are based on typical system values with two power supply units.

2Thermal dissipation values shown are based on typical system values.

3NVMEM on N3240 and N3220 uses a portion of the 6 GB of controller memory, resulting in ~5.25 GB memory for Data ONTAP.

4NVMEM on N3240 and N3220 uses a portion of the 6 GB of controller memory, resulting in ~5.25 GB memory for Data ONTAP.

5System capacity is calculated using base 10 arithmetic (1TB=1,000,000,000,000 bytes) and is derived based on the type, size, and number of drives.

6Max capacity shown can be achieved only by using 3 TB drives under Data ONTAP 8.0.2 or later.

7Maximum aggregate size is calculated by using base 2 arithmetic (1 TB = 240 bytes).

For more information about N series 3000 systems, see the following website:

http://www.ibm.com/systems/storage/network/n3000/appliance/index.html


Redbooks
ibm.com/redbooks
Copyright IBM Corp. 2013. All rights reserved.