IBM System x3400 M3 (Withdrawn)

IBM Redbooks Product Guide


Abstract

The System x3400 M3 servers are self-contained, high-performance, 5U tower systems designed for web and business server applications in remote or distributed environments. These servers are highly scalable in configuration, performance, and availability. They offer two-way SMP power with the latest Intel Xeon 5600 series processors, a dual connector eight-port SAS/SATA RAID controller on hot-swap models, an embedded Gigabit Ethernet controller, and six PCI Express 2.0 slots. These servers support SATA or SAS HDDs.

Note: This product has been withdrawn from marketing and is no longer available for ordering from IBM.

Contents


Table of contents


Introduction

The System x3400 M3 servers are self-contained, high-performance, 5U tower systems designed for web and business server applications in remote or distributed environments. These servers are highly scalable in configuration, performance, and availability. They offer two-way SMP power with the latest Intel Xeon 5600 series processors, a dual connector 8-port SAS/SATA RAID controller on hot-swap models, an embedded Gigabit Ethernet controller, and six PCI Express 2.0 slots. These servers support SATA or SAS HDDs.

These servers are flexible tower models that deliver the best blend of power, manageability, expandability, and serviceability. They meet the requirements of server applications in the small-to-medium businesses that need an affordable general-purpose network server. These servers fit into business environments where tower configurations are required. Figure 1 shows the IBM® System x3400 M3.


Figure 1. The IBM System x3400 M3

Did you know

The System x3400 M3 server supports optional spare DIMMs, memory mirroring, and RAID-0, RAID-1, and RAID-1E support standard with optional RAID-5, RAID-6, RAID-10, and RAID-50 available. It features large amounts of internal expansion and I/O support. Comprehensive systems management tools such as advanced diagnostics, Predictive Failure Analysis, and the ability to control resources from a single point make it easy to deploy, integrate, service, and manage from any location.

Key features

The IBM System x3400 M3 has the following features.

Performance

The x3400 M3 offers numerous features to boost performance and reduce costs:

  • Up to two 6-core Intel Xeon 5600 series processors offering superior performance. Xeon 5600 series processors offer up to 54% better performance than the previous generation 5500 series processors (workload dependent).
  • 16 DIMMs of registered 1333 MHz DDR3 ECC memory provide speed, high availability, and a memory capacity of up to 128 GB.
  • High-performance 6 Gbps SAS RAID controllers and 15K RPM 6 Gbps SAS disk drives in a variety of capacities to suit your local storage requirements.
  • The use of solid-state drives (SSDs) instead of or along with traditional spinning drives (HDDs) can significantly improve I/O performance. An SSD can support 20,000 I/O operations per second (IOPS) whereas a typical HDD handles fewer than 500 IOPS.

Flexibility and scalability

The x3400 M3 has the ability to grow with your application requirements with these features:
  • A choice of 4-core or 6-core processors with clock rates from 1.6 GHz to 3.6 GHz.
  • 16 DIMM sockets allowing memory expansion of up to 128 GB.
  • Up to two redundant hot-swap 920 W AC power supplies.
  • Seven USB 2.0 ports available - two front, four rear, and one internal for an embedded hypervisor.
  • The tower chassis can be converted to a 5U rack-mount chassis with the optional tower-to-rack conversion kit.
  • Storage bay flexibility: Up to 16 hot-swap 2.5" drive bays for SAS or SATA HDDs, or solid-state drives (intermixing supported) in addition to a bay for an internal optical drive.
  • Direct-attach SAS storage with the EXP2512, EXP2524, and EXP3000 storage enclosures is supported. IBM System Storage servers, including network-attached storage (NAS), and iSCSI or Fibre Channel-attached storage, can also be attached.
  • Up to seven PCI Express (PCIe) 2.0 I/O slots for increased network or storage connectivity. Optional PCI-X slots for specialized adapters.

Manageability and security

Powerful systems management features simplify local and remote management of the x3400 M3:
  • The x3400 M3 includes an Integrated Management Module (IMM) to monitor server availability, perform Predictive Failure Analysis, and trigger IBM Systems Director alerts.
  • An optional Virtual Media Key enables additional systems management capabilities, including web-based out-of-band remote control (keyboard video and mouse), remote optical drive support, Windows “blue screen” error capture, and support for LDAP and SSL protocols.
  • Text Console Redirection support allows the administrator to remotely view x3500 M3 text messages over Serial or LAN connections.
  • Integrated industry-standard Unified Extensible Firmware Interface (UEFI) next-generation BIOS. New capabilities include:
    • Human readable event logs — no more beep codes.
    • Complete out-of-band coverage by the Advance Settings Utility to simplify remote setup.
    • A complete setup solution, allowing adapter configuration functions to be moved into UEFI.
  • Integrated Trusted Platform Module (TPM) 1.2 support.
  • Industry-standard AES NI support for faster, stronger encryption.
  • Integrated IPMI 2.0 support alerts IBM Systems Director to anomalous environmental factors, such as voltage and thermal conditions. It also supports highly secure remote power control using data encryption.
  • IBM Systems Director is available for proactive systems management. IBM Systems Director comes with a portfolio of tools, including IBM Systems Director Active Energy Manager, IBM Service and Support Manager, and others. IBM Systems Director also offers extended systems management tools for additional server management and increased availability. When a problem is encountered, IBM Systems Director can issue administrator alerts via email, pager, and other methods.
  • IBM Systems Director Active Energy Manager provides advanced power management features with actual real-time energy monitoring, reporting, and capping features.

Availability and serviceability

The System x3400 M3 provides many features to simplify serviceability and increase system uptime:
  • The server offer Chipkill ECC memory protection (when using x4 DIMMs). Chipkill memory is up to 16 times better than standard ECC memory at correcting memory errors. This can help reduce downtime caused by memory errors.
  • The server offers memory mirroring for redundancy in the event of a non-correctable memory failure.
  • The server supports up to two redundant hot-swap 920 W AC power supplies.
  • Toolless cover removal provides easy access to upgrades and serviceable parts, such as HDDs and memory. Similarly, the Virtual Media Key and the ServeRAID controller can be installed and replaced without tools. This means less time (and therefore less money) spent servicing the x3400 M3.
  • The server offers hot-swap and redundant fan modules and power supplies and hot-swap disk drives (redundant when implemented in conjuction with a RAID controller). These features mean greater system uptime.
  • Toolless slides ship with the server, together with a cable management arm (CMA), that allows the rack server to easily slide into place.
  • A light path diagnostics panel and individual light path LEDs quickly lead the technician to failed (or failing) components. This simplifies servicing, speeds up problem resolution, and helps improve system availability.
  • Solid-state drives (SSDs) offer significantly better reliability than traditional mechanical HDDs for greater uptime.
  • The three-year (parts and labor) limited onsite warranty provides peace of mind and greater investment protection than a one-year warranty does.

Energy efficiency

The System x3400 M3 has an energy-efficient design with features including the following:
  • Low-voltage processors draw less energy and produce less waste heat than high-voltage processors, thus helping to reduce data center energy costs. Available 4-core Xeon 5600 series processors use only 40 W and 6-core processors consume as little as 60 W.
  • Optional solid-state drives (SSDs) use only 2 W of power per drive, compared to 9 - 10 W for 2.5-inch HDDs. This is as much as 80% less power than a 2.5-inch HDD would use, with a corresponding reduction in heat output that further improves the overall bottom line.
  • Support for 1.35 V low-voltage DDR3 memory DIMMs that consume 20% less energy.
  • Energy-efficient components, including low-voltage transistors and voltage regulator modules, and power supplies that are up to 90% efficient.
  • The server uses hexagonal ventilation holes in the chassis. Hexagonal holes can be grouped more densely than round holes, providing more efficient airflow through the system chassis. This ultimately results in reduced operational costs.


Locations of key components and connectors

Figures 2 and 3 show the front and rear of the server.

Front view of the IBM System x3400 M3
Figure 2. Front view of the IBM System x3400 M3

Rear view of the IBM System x3400 M3
Figure 3. Rear view of the IBM System x3400 M3

Figure 4 shows the locations of key components inside the server.


Figure 4. Inside view of the IBM System x3400 M3

Standard specifications

The following table lists the standard specifications.

Table 1. Standard specifications

ComponentsSpecification
Form factorTower or 5U Rack.
ProcessorUp to two six-core (up to 3.46 GHz) or quad-core (up to 2.66 GHz) Intel Xeon 5600 series processors with QuickPath Interconnect technology up to 6.4 GT/s, and up to 1333 MHz memory speed. Supports specific Quad-core Intel Xeon 5500 series processors via Configure-To-Order (CTO).
Memory cacheUp to 12 MB L3 for Xeon 5600 processors. Up to 8 MB L3 for Xeon 5500 processors.
ChipsetIntel 5520.
MemoryUp to 16 DIMM sockets (eight DIMMs per processor). Up to 128 GB with 8 GB DDR3 RDIMMs and 16 populated DIMM slots (up to 64 GB with eight DIMMs per processor), or up to 48 GB with 4 GB DDR3 UDIMMs and 12 populated DIMM slots (up to 24 GB with six DIMMs per processor).
Memory protectionECC, ChipKill (for x4-based memory DIMMs), memory mirroring, and memory sparing.
Disk drive baysUp to four 3.5" Simple-Swap SATA HDDs, or up to eight 3.5" hot-swap SAS/SATA HDDs, or up to 16 2.5" hot-swap SAS/SATA HDDs or solid-state drives. If the 670 W fixed power supply is used, only up to four 3.5-inch drives can be installed or up to eight 2.5-inch drives can be installed.
Maximum internal storage Up to 12 TB with 3TB 3.5" SS SATA HDDs, or up to 24 TB with 3TB 3.5" HS SATA HDDs, or up to 9.6 TB with 600 GB 2.5" HS SAS HDDs. Intermix of SAS/SATA is supported.
RAID supportRAID 0, 1, 1E with ServeRAID BR10il v2 or M1015; RAID 0, 1, 5, 10, 50 with M5014 or M5015. An optional upgrade to RAID 5 is available for M1015. An optional upgrade to RAID 6, 60 is available for M5014/M5015.
Optical drive baysOne with support for HH DVD-ROM or Multiburner (for all models except 8x 3.5" HDDs), or one with support for UltraSlim DVD-ROM or Multiburner (for 8x 3.5" HDD models).
Tape drive baysTwo with support for HH internal tape drives. A maximum of one or two internal tape drives can be installed (tape drive dependent).
EthernetIntegrated two Gigabit Ethernet ports. Broadcom 5716C controller.
PCI Expansion slots The server supports up to eight PCI Express slots (six slots are on the system planar and one or two slots are on the extender card. The slot form factors are as follows.
System planar:
  • Slot 1: PCIe 2.0 x8, full height, half length
  • Slot 2: PCIe 2.0 x16 (x8 wired), full height, full length
  • Slot 3: PCIe 2.0 x8 (x4 wired), full height, full length
  • Slot 4: PCIe 2.0 x8 (x4 wired), full height, full length
  • Slot 5: PCIe 2.0 x8, full height, full length
  • Slot 6: PCI 32-bit/33 MHz, full height, half length
PCI Express extender card (comes with standard models):
  • Slot 7: PCIe x8 (x4 wired), full height, half length
PCI-X extender card (only available in CTO):
  • Slot 7: PCI-X 64-bit/133 MHz, full height, half length
  • Slot 8: PCI-X 64 bit/133 MHz, full height, half length
External portsTwo USB 2.0 on front. Four USB 2.0, one DB-15 video, one DB-9 serial, one RJ-45 systems management, two RJ-45 network ports on rear. One internal USB port for embedded hypervisor. One internal USB port for internal USB tape drive.
CoolingIBM Calibrated Vectored Cooling™ with three hot swap (non-redundant) fans
Power supplyUp to two redundant hot-swap 920 W AC power supplies or one fixed 670 W AC power supply (model dependent).
Hot-swap components Hard drives, power supplies, fans.
Systems management UEFI, IBM Integrated Management Module (IMM), Predictive Failure Analysis, Light Path Diagnostics, Automatic Server Restart, IBM Systems Director* and IBM Systems Director Active Energy Manager™, IBM ServerGuide. Optional Virtual Media Key for remote presence (graphics, keyboard and mouse, virtual media).
Security featuresPower-on password, administrator's password, Trusted Platform Module (TPM).
VideoMatrox G200eV with 16 MB memory integrated into the IMM. Maximum resolution is 1280x1024 at 75 Hz with 16M colors.
Operating systems supported Microsoft Windows Server 2008 R2 and 2008, Red Hat Enterprise Linux 5 and 6, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4.0 and 4.1, VMware ESXi 4.0 and 4.1 embedded hypervisor.
Limited warranty One-year (7378) or 3-year (7379) customer-replaceable unit and onsite limited warranty with 9x5/next-business-day response time.
Service and supportOptional service upgrades are available through IBM ServicePacs®: 4-hour or 2-hour response time, 8-hour fix time, 1-year or 2-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software.
DimensionsWidth: 218 mm (8.6 in), depth: 767 mm (30.2 in), height: 440 mm (17.3 in)
WeightMinimum configuration: 27.10 kg (59.7 lb), Maximum configuration: 37.85 kg (83.4 lb)
* Effective October 12, 2012, or until supply is depleted, IBM will discontinue the shipment of IBM Systems Director DVDs with IBM System x servers and IBM BladeCenter chassis. IBM Systems Director Express Edition and IBM Systems Director Standard Edition, which include software subscription and support, continue to be available for IBM System x servers and IBM Blade Centers.

The x3400 M3 servers are shipped with the following items:
  • Statement of Limited Warranty.
  • Important Notices.
  • Documentation CD that contains the Installation and User's Guide.
  • Country-specific models might have one 2.8 m country-specific line cord (country dependent).

Standard models

The following table lists the standard models.

Table 2. Standard models

Model†Intel Processor*
(2 maximum)
RAMDisk
controller
Disk bays
(std/max)
DisksNetworkOpticalPower supply
Models announced February 2011
7378/
7379-A2x
1x E5603 4C 1.60 GHz
4 MB 1066 MHz
1x 2 GBIntegrated SATA
(no RAID)
4x 3.5"
SS / 4
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-A4x
1x E5603 4C 1.60 GHz
4 MB 1066 MHz
1x 2 GBServeRAID
BR10il v2
4x 3.5"
HS / 4
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-B2x
1x E5606 4C 2.13 GHz
8 MB 1066 MHz
1x 2 GBIntegrated SATA
(no RAID)
4x 3.5"
SS / 4
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-B4x
1x E5606 4C 2.13 GHz
8 MB 1066 MHz
1x 2 GBServeRAID
BR10il v2
4x 3.5"
HS / 4
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-C2x
1x E5607 4C 2.26 GHz
8 MB 1066 MHz
1x 2 GBServeRAID
BR10il v2
4x 3.5"
HS / 4
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-56x
1x E5620 4C 2.40 GHz
12 MB 1066 MHz
1x 4 GBServeRAID
BR10il v2
4x 3.5"
HS / 4
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-58x
1x E5620 4C 2.40 GHz
12 MB 1066 MHz
1x 4 GBServeRAID
M1015
8x 2.5"
HS / 16
Open2 x GbEDVD1 x 920 W
Hot-swap
7378/
7379-D2x
1x E5645 6C 2.40 GHz
12 MB 1333 MHz
1x 4 GBServeRAID
M1015
8x 2.5"
HS / 8
Open2 x GbEDVD1x 670 W
Fixed
7378/
7379-F2x
1x E5649 6C 2.53 GHz
12 MB 1333 MHz
1x 4 GBServeRAID
M5014
16x 2.5"
HS / 16
Open2 x GbEDVD1 x 920 W
Hot-swap
† The x3400 M3 is available as machine type 7378 with a 1-year warranty (AP only) or as machine type 7379 with a 3-year warranty. This is the only difference between systems of the same model (for example, comparing 7378-A2x and 7379-A2x).
* In the processor column: Standard quantity of processors, processor model, core speed, cores, L3 cache, memory speed.

Refer to the Standard Specifications section for information about standard features of the server.

Express models

The following table lists the region-specific Express models. Express models are preconfigured with additional components, such as processors and memory, to make the ordering and installation process simpler.

Table 3. Express models

Region/
model
Processor* (2 maximum)MemoryRAID
controller
Disk bays
(std / max)
DisksNetworkOpticalPower
supply
NA and LA
7379-E1U1x Xeon E5503 2.0 GHz 2C 4 MB 800 MHz 3x 2 GBBR10il v24x 3.5" SS / 4Optional2x GbEDVD-ROM1x 670 W
7379-E2U1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz3x 4 GBBR10il v24x 3.5" HS / 4Optional2x GbEDVD-ROM1x 670 W
7379-E3U1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 3x 4 GBM10158x 2.5" HS / 16Optional2x GbEDVD-ROM1x 920 W
NE and SW IOT
7379-K1G1x Xeon E5503 2.0 GHz 2C 4 MB 800 MHz1x 2 GBBR10il v24x 3.5" SS / 4Optional2x GbEDVD-ROM1x 920 W
7379-K2G1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM10154x 3.5" HS / 8Optional2x GbEMultiburner1x 920 W
7379-K3G1x Xeon E5507 2.26 GHz 4C 4 MB 800 MHz1x 4 GBM1015 + Advance Feature Key8x 2.5" HS / 16Optional2x GbEMultiburner1x 920 W
7379-K4G1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM1015 + Advance Feature Key8x 2.5" HS / 16Optional2x GbEMultiburner2x 920 W
7379-K8G1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM50144x 3.5" HS / 8Optional2x GbEMultiburner2x 920 W
7379-KDG1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM50148x 2.5" HS / 162x 146 GB2x GbEMultiburner1x 920 W
7379KXG1x Xeon E5607 2.26 GHz 4C 8 MB 1333 MHz1x 4 GB M10158x 2.5" HS / 8Optional2x GbEMultiburner1x 670 W
7379KZG1x Xeon E5620 2.4 GHz 4C 12 MB 1333 MHz1x 2 GBM50146x 2.5" HS / 8Optional 2x GbEMultiburner1x 670 W
CEE and MEA IOT
7379-K5G1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz2x 4 GBM10154x 3.5" HS / 8Optional2x GbEMultiburner1x 920 W
7379-K6G1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM50148x 2.5" HS / 162x 146 GB2x GbEMultiburner2x 920 W
7379-K8G1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM50144x 3.5" HS / 8Optional2x GbEMultiburner2x 920 W
7379-KDG1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM50148x 2.5" HS / 162x 146 GB2x GbEMultiburner1x 920 W
7379-KBG1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM50144x 3.5" HS / 8Optional2x GbEMultiburner1x 920 W
RCIS
7379-K9G1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM50144x 3.5" HS / 8Optional2x GbEMultiburner1x 920 W
7379-KAG1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM5014 + Battery4x 3.5" HS / 8Optional2x GbEMultiburner1x 920 W
7379-KBG1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM50144x 3.5" HS / 8Optional2x GbEMultiburner1x 920 W
7379-KCG1x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz2x 4 GBM5015 + Battery8x 2.5" HS / 16Optional2x GbEMultiburner1x 920 W
Japan
7379-PAM1x Xeon E5503 2.0 GHz 2C 4 MB 800 MHz2x 2 GBBR10il v24x 3.5" HS / 82x 1 TB2x GbEDVD-ROM1x 920 W
7379-PAN1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz2x 2 GBM5014 + Battery4x 3.5" HS / 83x 300 GB2x GbEDVD-ROM1x 920 W
China
7379-I011x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM10158x 2.5" HS / 81x 146 GB2x GbEDVD-ROM1x 670 W
7379-I051x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 4 GBM5015 (no battery)8x 2.5" HS / 81x 146 GB2x GbEDVD-ROM1x 670 W
7379-I211x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM10158x 2.5" HS / 81x 146 GB2x GbEDVD-ROM1x 670 W
7379-I251x Xeon E5620 2.40 GHz 4C 12 MB 1066 MHz 1x 4 GBM5015 (no battery)8x 2.5" HS / 81x 146 GB2x GbEDVD-ROM1x 670 W
ISA
7379-I4S1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz1x 2 GBBR10i4x 3.5" SS / 41x 250 GB2x GbEDVD-ROM1x 670 W
7379-I3S1x Xeon E5507 2.26 GHz 4C 4 MB 800 MHz1x 4 GBBR10i8x 2.5" HS / 161x 146 GB2x GbEDVD-ROM2x 920 W
Hong Kong
7379-I5H1x Xeon E5506 2.13 GHz 4C 4 MB 800 MHz2x 2 GBM50144x 3.5" HS / 4Optional2x GbEDVD-ROM1x 670 W
* In the processor column: standard quantity of processors, processor model, core speed, cores, L3 cache, memory speed.

Processor options

The server supports the processor options listed in the following table. The server supports up to two processors. The table also shows which server models have each processor standard. If there is no corresponding where-used model for a particular processor, then this processor is only available through CTO.

Table 4. Processor options
Feature
code**
DescriptionStandard models
where used
Intel Xeon 5600 series processors
A0VC / A0VDIntel Xeon Processor E5603 4C 1.60GHz 4 MB Cache 1066MHz 80wA2x, A4x
A0VE / A0VFIntel Xeon Processor E5606 4C 2.13GHz 8 MB Cache 1066MHz 80wB2x, B4x
A0VG / A0VHIntel Xeon Processor E5607 4C 2.26GHz 8 MB Cache 1066MHz 80wC2x
4493 / 4631Intel Xeon Processor E5620 4C 2.40GHz 12 MB Cache 1066MHz 80w 52x, 54x, 56x, 58x
4494 / 4632Intel Xeon Processor E5630 4C 2.53GHz 12 MB Cache 1066MHz 80w 62x
4495 / 4633Intel Xeon Processor E5640 4C 2.66GHz 12 MB Cache 1066MHz 80w 72x, 74x
A0VJ / A0VKIntel Xeon Processor E5645 6C 2.40GHz 12 MB Cache 1333MHz 80wD2x
A0VL / A0VMIntel Xeon Processor E5649 6C 2.53GHz 12 MB Cache 1333MHz 80wF2x
0723 / 7683Intel Xeon Processor L5609 4C 1.86GHz 12 MB Cache 1066MHz 40w -
0722 / 7682Intel Xeon Processor L5630 4C 2.13GHz 12 MB Cache 1066MHz 40w -
0721 / 7681Intel Xeon Processor L5640 6C 2.26GHz 12 MB Cache 1333MHz 60w -
4496 / 4634Intel Xeon Processor X5650 6C 2.66GHz 12 MB Cache 1333MHz 95w -
4497 / 4635Intel Xeon Processor X5660 6C 2.80GHz 12 MB Cache 1333MHz 95w -
4498 / 4636Intel Xeon Processor X5670 6C 2.93GHz 12 MB Cache 1333MHz 95w -
A0VS / A0VTIntel Xeon Processor X5675 6C 3.06GHz 12 MB Cache 1333MHz 95w-
Intel Xeon 5500 series processors
0705 / 4639*Intel Xeon Processor E5503 2C 2.0 GHz 4 MB Cache 800 MHz 80w22x, 24x
6656 / 6955Intel Xeon Processor E5504 4C 2.00 GHz 4 MB Cache 800MHz 80w -
4428 / 4427Intel Xeon Processor E5506 4C 2.13 GHz 4 MB Cache 800MHz 80w 32x, 34x
0706 / 4640*Intel Xeon Processor E5507 4C 2.26 GHz 4 MB Cache 800MHz 80w 42x
4425 / 4424Intel Xeon Processor E5540 4C 2.53 GHz 8 MB Cache 1066MHz 80w -
** The first feature code is for Processor 1. The second feature code is for Processor 2.
* Withdrawn from marketing.

Memory options

IBM DDR3 memory is compatibility tested and tuned for optimal System x performance and throughput. IBM memory specifications are integrated into the light path diagnostics for immediate system performance feedback and optimum system uptime. From a service and support standpoint, IBM memory automatically assumes the IBM system warranty, and IBM provides service and support worldwide.

The IBM System x3400 M3 supports DDR3 memory. The server supports up to eight DIMMs when one processor is installed and up to 16 DIMMs when two processors are installed. However, the maximum number of DIMMs is limited by the number of ranks in the DIMMs:

  • RDIMMs
    • Up to 16 single-rank RDIMMs for a maximum of 64 GB (16x 4 GB)
    • Up to 16 dual-rank RDIMMs for a maximum of 128 GB (16x 8 GB)
  • UDIMMs
    • Up to 16 single-rank UDIMMs for a maximum of 16 GB (16x 1 GB)
    • Up to 16 dual-rank UDIMMs for a maximum of 64 GB (16x 4 GB)

Each CPU has three memory channels, two of which contain three DIMMs per channel and the third contains two DIMMs. RDIMMs can be populated up to three per channel. However, UDIMMs can only be populated two DIMMs per channel. That is, you can have up to 16 RDIMMs installed in the server, but only up to 12 UDIMMs. Mixing UDIMMs and RDIMMs is not supported.

Maximum memory speed is limited by memory speed supported by the specific CPU (that is, if the CPU only supports 1066 MHz, then the memory speed cannot exceed 1066 MHz in any case) and by the number and type of DIMMs installed (whatever is lower), as follows:
  • Intel Xeon 5600 series processors:
    • 1333 MHz when one or two single-rank or dual-rank RDIMMs per channel are installed or one UDIMM per channel is installed
    • 1066 MHz when two UDIMMs per channel are installed
    • 800 MHz when three single-rank or dual-rank RDIMMs per channel are installed
  • Quad-core Intel Xeon 5500 series processors:
    • 1333 MHz when one single-rank or dual-rank RDIMM per channel is installed or one UDIMM per channel is installed
    • 1066 MHz when two single-rank or dual-rank RDIMMs per channel are installed, or two UDIMMs per channel are installed
    • 800 MHz when three single-rank or dual-rank RDIMMs per channel are installed
  • Dual-core Intel Xeon 5500 series processors only support memory speed at 800 MHz.


The server supports both 1.5 V and 1.35 V DIMMs. Mixing 1.5 V and 1.35 V DIMMs in the same server is supported for Intel Xeon 5600 series processor-based systems. In such a case, all DIMMs operate at 1.5 V. Intel Xeon 5500 series processor-based systems do not support 1.35 V DIMMs.

The following memory protection technologies are supported:
  • ECC
  • ChipKill (for x4-based RDIMMs)
  • Memory mirroring
  • Memory sparing

If memory mirroring is used, then DIMMs must be installed in pairs (a minimum of one pair per CPU), and both DIMMs in a pair must be identical in type and size. If memory sparing is used, then DIMMs must be installed in sets of three, and all DIMMs in the same set must be identical in type and size. Memory sparing is only supported for Intel Xeon 5600 series processor-based systems.

The following table lists memory options available for the x3400 M3 server.

Table 5. Memory options
Part
number
Feature
code
DescriptionMaximum quantity
supported
Standard models
where used
RDIMMs
49Y140589402GB (1x2GB, 1Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM16 (8 per CPU)A2x, A4x, B2x, B4x, C2x
49Y1433*89342GB (1x2GB, 2Rx8, 1.5V) PC3-10600 CL9 ECC DDR3 1333MHz LP RDIMM16 (8 per CPU)22x, 24x, 32x, 34x, 42x
49Y140689414GB (1x4GB, 1Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM16 (8 per CPU)-
49Y1435*89364GB (1x4GB, 2Rx4, 1.5V) PC3-10600 CL9 ECC DDR3 1333MHz LP RDIMM16 (8 per CPU)52x, 54x, 62x, 72x, 74x
49Y140789424GB (1x4GB, 2Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM16 (8 per CPU)56x, 58x, D2x, F2x
49Y139789238GB (1x8GB, 2Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM16 (8 per CPU)-
UDIMMs
49Y1403A0QS2 GB (1x 2 GB, 1Rx8, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz LP UDIMM12 (6 per CPU)-
49Y140486484 GB (1x 4 GB, 2Rx8, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz LP UDIMM12 (6 per CPU)-
* Withdrawn from marketing.

Internal disk storage options

IBM System x3400 M3 server supports the following internal storage configurations:

  • Four 3.5" simple-swap or four 3.5" hot-swap SATA hard drive bays
  • Eight 3.5" hot-swap SAS/SATA hard drive bays
  • Eight 2.5" SFF hot-swap SAS/SATA SFF hard drive bays
  • 16x 2.5" SFF hot-swap SAS/SATA SFF hard drive bays

Figure 5 shows these configurations.


Figure 5. Internal drive configurations

Standard models of x3400 M3 ship with either four 3.5" SS SATA HHD bays (configuration 1 in Figure 5), four 3.5" HS SAS/SATA HDD bays (also configuration 1), or eight 2.5" SAS/SATA hot-swap hard drive bays (configuration 3). The following table shows internal storage expansion options available for the x3400 M3 server.

Table 6. Internal storage expansion options
Part
number
Feature
code
NameMaximum
supported
69Y0894 1731Additional 4x 3.5-inch LFF hot-swap SAS/SATA HDD upgrade kit
(used in configuration 2 in Figure 5)
1
69Y0895 1725Additional 8x 2.5-inch SFF hot-swap SAS/SATA HDD upgrade kit
(includes a 6 Gbps SAS expander) (used in configuration 4, as shown in Figure 5)
1

These options are used in the following ways:
  • 69Y0894 upgrades models with four 3.5" hot-swap HDD bays to eight 3.5" hot-swap HDD bays (configuration 2 in Figure 5). Disk backplanes are directly connected to the ports on the RAID controller. If this option is used, then only one UltraSlim optical drive can be installed. Internal tapes are not supported in this configuration.
  • 69Y0895 upgrades models with eight 2.5" hot-swap HDD bays to 16x 2.5" hot-swap HDD bays (configuration 4 in Figure 5). This option includes a SAS expander card that fits into a regular PCI-E slot, decreasing the number of available slots by one. The RAID controller occupies a separate PCI-E slot. Two PCI-E slots are occupied by storage cards in this configuration. Disk backplanes are connected to the SAS expander, and the SAS expander is connected to the RAID controller.

The following table lists the RAID controllers and additional options used for internal disk storage of the x3400 M3 server.

Table 7. RAID controllers for internal storage
Part numberFeature codeDescriptionMaximum
supported
Standard models
where used
49Y4731 9742ServeRAID-BR10il SAS/SATA Controller V21A4x, B4x, C2x, 56x, 24x, 34x, 42x, 52x
81Y4492A1XLServeRAID H1110 SAS/SATA Controller 1-
46M08329749ServeRAID M1000 Series Advance Feature Key1-
46M08310095ServeRAID M1015 SAS/SATA Controller158x, D2x, 54x, 62x, 72x
46M09175744ServeRAID M5000 Series Battery Kit1-
46M09305106ServeRAID M5000 Series Advance Feature Key1†-
81Y4426A10CServeRAID M5000 Series Performance Accelerator Key1†-
46M09163877ServeRAID M5014 SAS/SATA Controller1F2x
46M08290093ServeRAID M5015 SAS/SATA Controller2*74x
† Only one key is supported in each controller, either the Advance Feature Key or the Performance Accelerator Key.
* Two M5015 RAID controllers are only supported via CTO in a sixteen 2.5" HDD bays configuration.

The ServeRAID BR10il v2 SAS/SATA Controller has the following specifications:
  • One Mini-SAS internal connector
  • Supports RAID levels 0, 1, and 1E
  • 3 Gbps throughput per port
  • Based on the LSI 1064E controller
  • PCI Express 2.0 x4 host interface
  • Stripe size: 64 KB (fixed)

The ServeRAID H1110 SAS/SATA Controller has the following specifications:
  • Four internal 6 Gbps SAS/SATA ports
  • One x4 mini-SAS internal connector (SFF-8087)
  • 6 Gbps throughput per port
  • Based on LSI SAS2004 6 Gbps RAID on Chip (ROC) controller
  • x4 PCI Express 2.0 host interface
  • Supports RAID 0, 1, 1E, and 10
  • Supports up to two integrated volumes
  • Supports up to two global hot-spare drives
  • Supports drive sizes greater than 2 TB for RAID 0, 1E, and 10 (not RAID 1)
  • Fixed stripe size of 64 KB

The ServeRAID M1015 SAS/SATA Controller has the following specifications:
  • Two Mini-SAS internal connectors
  • Supports RAID levels 0, 1, and 10
  • Supports RAID levels 5 and 50 with optional ServeRAID M1000 Series Advanced Feature Key
  • 6 Gbps throughput per port
  • Based on the LSI SAS2008 6 Gbps RAID on Chip (ROC) controller
  • PCI Express 2.0 x8 host interface
  • Configurable stripe size up to 64 KB

The ServeRAID M5014 SAS/SATA Controller has the following specifications:
  • Two Mini-SAS internal connectors
  • Supports RAID levels 0, 1, 5, 10, and 50
  • Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
  • Performance optimization for drives with optional M5000 Series Performance Accelerator Key
  • 6 Gbps throughput per port
  • PCI Express 2.0 x8 host interface
  • Based on the LSI SAS2108 6 Gbps ROC controller
  • 256 MB of onboard cache
  • Optional Intelligent Li-Ion-based battery backup unit with the ServeRAID M5000 Series Battery Kit

The ServeRAID M5015 SAS/SATA Controller has the following specifications:
  • Two Mini-SAS internal connectors
  • Supports RAID levels 0, 1, 5, 10, and 50
  • Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
  • Performance optimization for drives with optional M5000 Series Performance Accelerator Key
  • 6 Gbps throughput per port
  • PCI Express 2.0 x8 host interface
  • Based on the LSI SAS2108 6 Gbps ROC controller
  • 512 MB of onboard cache
  • Standard Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention

The ServeRAID-MR10i SAS/SATA Controller has the following specifications:
  • Full-height (3U), half-length card
  • Two internal x4 SFF-8087 connectors
  • PCI Express x8 host interface
  • SAS Controller: LSI 1078e
  • 3 Gbps per port data transfer rate
  • Supports SAS 3 Gbps and SATA 2
  • 256 MB cache
  • Optional Li-Ion battery backup
  • Maximum stripe size: 1024 KB
  • RAID levels: RAID 0, 1, 5, 6, 10, 50, and 60

The ServeRAID MR10M SAS/SATA Controller has the following specifications:
  • MD2 form factor card (2U low-profile height)
  • Two SFF-8088 SAS x4 external connectors
  • PCI Express x8 host interface
  • SAS Controller: LSI 1078e
  • 3 Gbps per port data transfer rate
  • Supports SAS 3 Gbps and SATA 2
  • 256 MB cache
  • Li-Ion battery backup
  • Maximum stripe size: 1024 KB
  • RAID levels : RAID 0, 1, 5, 6, 10, 50, and 60

For more information, see the list of IBM Redbooks Product Guides in the RAID adapters category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=raid
    The following table lists hard drive options for internal disk storage of the x3400 M3 server.

    Table 8. Disk drive options
    Part
    number
    Feature
    code
    DescriptionMaximum
    supported*
    3.5" Simple-Swap SATA and NL SATA HDDs
    81Y9778A280IBM 3TB 7.2K 6Gbps NL SATA 3.5" SS HDD4
    42D07875416IBM 2 TB 7200 NL SATA 3.5" SS HDD4
    39M45145288500 GB 7200 RPM 3.5" Simple-Swap SATA II4
    3.5" Hot-Swap SATA and NL SATA HDD
    81Y9774A27ZIBM 3 TB 7.2K 6Gbps NL SATA 3.5" HS HDD 8
    42D07825415IBM 2 TB 7200 NL SATA 3.5" HS HDD8
    43W76265560IBM 1 TB 7200 SATA 3.5" HS HDD8
    39M45305196500 GB 7200 RPM 3.5" Hot-Swap SATA II8
    3.5" Hot-Swap SAS HDDs
    44W22445313IBM 600 GB 15 K 6 Gbps SAS 3.5" Hot-Swap HDD8
    44W22395312IBM 450 GB 15 K 6 Gbps SAS 3.5" Hot-Swap HDD8
    44W22345311IBM 300 GB 15 K 6 Gbps SAS 3.5" Hot-Swap HDD8
    3.5" Hot-Swap NL SAS HDDs
    81Y9758A281IBM 3 TB 7.2K 6Gbps NL SAS 3.5" HS HDD8
    42D07675417IBM 2 TB 7.2 K 6 Gbps NL SAS 3.5" HS HDD8
    42D07775418IBM 1 TB 7.2 K 6 Gbps NL SAS 3.5" HS HDD8
    2.5" Hot-swap SAS-SSD Hybrid Drive
    00AD102A4G7IBM 600GB 10K 6Gbps SAS 2.5'' G2HS Hybrid16
    2.5" Hot-Swap NL SATA HDDs
    81Y9730A1AVIBM 1TB 7.2K 6Gbps NL SATA 2.5" SFF HS HDD16
    81Y9726A1NZIBM 500GB 7.2K 6Gbps NL SATA 2.5" SFF HS HDD16
    81Y9722A1NXIBM 250GB 7.2K 6Gbps NL SATA 2.5" SFF HS HDD16
    2.5" Hot-Swap 10K SAS HDDs
    00AD075A48SIBM 1.2TB 10K 6Gbps SAS 2.5'' G2HS HDD16
    81Y9650A282IBM 900GB 10K 6Gbps SAS 2.5" Slim-HS HDD16
    49Y20035433IBM 600 GB 10 K 6 Gbps SAS 2.5" SFF Slim-HS HDD16
    42D06375599IBM 300 GB 10 K 6 Gbps SAS 2.5" SFF Slim-HS HDD16
    2.5" Hot-Swap 15K SAS HDDs
    81Y9670A283IBM 300GB 15K 6Gbps SAS 2.5" SFF HS HDD 16
    42D06775536IBM 146 GB 15 K 6 Gbps SAS 2.5" SFF Slim-HS HDD16
    2.5" Hot-Swap NL SAS HDDs
    81Y9690A1P3IBM 1TB 7.2K 6Gbps NL SAS 2.5" SFF HS HDD16
    42D07075409IBM 500 GB 7200 6 Gbps NL SAS 2.5" SFF Slim-HS HDD16
    2.5" Solid state drives
    00W1125A3HRIBM 100GB SATA 2.5" MLC HS Enterprise SSD16
    43W7718A2FNIBM 200GB SATA 2.5" MLC HS SSD16
    49Y5839A3ASIBM 64GB SATA 2.5" MLC HS Enterprise Value SSD16
    49Y5844A3AUIBM 512GB SATA 2.5" MLC HS Enterprise Value SSD16
    90Y8643A2U3IBM 256GB SATA 2.5" MLC HS Enterprise Value SSD16
    90Y8648A2U4IBM 128GB SATA 2.5" MLC HS Enterprise Value SSD16
    * If the server has a 670 W fixed power supply, then only 4x 3.5-inch drives or 8x 2.5-inch drives can be installed.

    Internal backup units

    The server supports the SATA, USB, and SAS internal tape drive and RDX options listed in the following table. These internal drives are installed in the 5.25" HH bays in the server. However, not all configurations offer 5.25" HH bays as shown in Figure 5. The configuration rules are:

    • A maximum of two SATA tape drives, one SAS tape drive, or one USB tape drive is supported.
    • The SAS tape drive requires a SAS HBA to be installed in the server.
    • The USB tape and RDX drive connects to the dedicated USB tape drive connector on the system board.
    • If two internal tape drives are installed, then the maximum number of optical drives is limited to one.
    • Configurations with eight 3.5" HDD bay configurations do not support tape drives (Figure 5).
    • Configurations with 24x 2.5" HDD bay support either one internal tape drive or one internal optical drive, but not both (Figure 5).

    Table 9. Internal tape drives
    Part
    number
    Feature
    code
    DescriptionMaximum
    supported
    46C53995711IBM DDS Generation 5 USB Tape Drive1
    39M56365395IBM DDS Generation 6 USB Tape Drive1
    43W84785393IBM Half High LTO Gen 3 SAS Tape Drive1
    44E88955397IBM Half High LTO Gen 4 SAS Tape Drive1
    49Y98985345IBM Internal Half High LTO Gen 5 SAS Tape Drive 1
    00D2786A2VEIBM RDX Internal USB 3.0 Dock with 320GB Cartridge1
    00D2787A2VFIBM RDX Internal USB 3.0 Dock with 500GB Cartridge1
    00D2788A2VGIBM RDX Internal USB 3.0 Dock with 1TB Cartridge1

    For more information, see the list of IBM Redbooks Product Guides in the Backup units category:
    http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=tape

    Optical drives

    The server supports the optical drive options listed in the following table.

    Table 10. Optical drives

    Part numberFeature
    code
    DescriptionMaximum
    supported
    Standard models
    where used
    None*4154IBM HH DVD-ROM56x, 58x, A2x, A4x, B2x, B4x,
    C2x, D2x, E4x, E6x, F2x, 74x,
    E1x, E2x, E3x, 22x, 24x, 32x,
    34x, 42Yx, 52x, 54x, 62x, 72x
    81Y64044155IBM HH Multiburner DVD-
    46M09014161IBM UltraSlim Enhanced SATA DVD-ROME5x,
    46M09024163IBM UltraSlim Enhanced SATA Multiburner 1-
    * This option is only available via CTO or is already installed in standard models.

    The two half-high drives in the table can be installed in any available 5.25" drive bays (Figure 5).

    Half-High SATA DVD-ROM (feature 4154) supports the following media and speeds for reading:
    • CD-ROM 48X
    • CD-DA (DAE) 40X
    • CD-R 48X
    • CD-RW 40X
    • DVD-ROM (single layer) 16X
    • DVD-ROM (dual layer) 12X
    • DVD-R (4.7 GB) 16X
    • DVD-R DL 12X
    • DVD+R 16X
    • DVD+R DL 12X
    • DVD-RW (4.7 GB) 12X
    • DVD+RW 12X
    • DVD-RAM (4.7/9.4 GB) 6X

    Half-High SATA multiburner (81Y6404) supports the same media and speeds for reading as HH DVD-ROM. In addition, this drive supports the following media and speeds for writing:

    • CD-R 24X
    • CD-RW 4X
    • High Speed CD-RW 10X
    • Ultra Speed CD-RW 16X
    • DVD-R 8X
    • DVD-R DL 8X
    • DVD+R 8X
    • DVD+R DL 8X
    • DVD-RW 6X
    • DVD+RW 8X
    • DVD-RAM 3X

    IBM UltraSlim Enhanced SATA DVD-ROM (part number 46M0901) supports the following media and speeds for reading:

    • CD-ROM 24X
    • CD-DA (DAE) 20X
    • CD-R 24X
    • CD-RW 24X
    • DVD-ROM (single layer) 8X
    • DVD-ROM (dual layer) 8X
    • DVD-R (4.7 GB) 6X
    • DVD-R DL 4X
    • DVD+R 6X
    • DVD+R DL 4X
    • DVD-RW (4.7 GB) 4X
    • DVD+RW 4X
    • DVD-RAM (4.7/9.4 GB) 4X

    IBM UltraSlim Enhanced SATA Multi-Burner (part number 46M0902) supports the same media and speeds for reading as DVD-ROM (46M0901), in addition to the following media and speeds for writing:
    • CD-R 24X
    • CD-RW 4X
    • High Speed CD-RW 10X
    • Ultra Speed CD-RW 16X
    • Ultra Speed Plus CD-RW 16X
    • DVD-R 8X
    • DVD-R DL 6X
    • DVD+R 8X
    • DVD+R DL 6X
    • DVD-RW 6X
    • DVD+RW 8X
    • DVD-RAM 5X

    I/O expansion options

    The server supports up to eight PCI Express slots (six slots are on the system planar and one or two slots are on the extender card. The slot form factors are as follows.

    System planar:

    • Slot 1: PCIe 2.0 x8, full height, half length
    • Slot 2: PCIe 2.0 x16 (x8 wired), full height, full length
    • Slot 3: PCIe 2.0 x8 (x4 wired), full height, full length
    • Slot 4: PCIe 2.0 x8 (x4 wired), full height, full length
    • Slot 5: PCIe 2.0 x8, full height, full length
    • Slot 6: PCI 32-bit/33 MHz, full height, half length

    PCI Express extender card (comes with standard models):
    • Slot 7: PCIe x8 (x4 wired), full height, half length

    PCI-X extender card (only available in CTO):
    • Slot 7: PCI-X 64-bit/133 MHz, full height, half length
    • Slot 8: PCI-X 64 bit/133 MHz, full height, half length

    Network adapters

    The x3400 M3 supports two integrated Gigabit Ethernet ports. Integrated NICs have the following features:

    • Broadcom BCM5709C chip
    • TCP Offload Engine (TOE) support
    • Wake on LAN support
    • 802.1Q VLAN tagging support
    • NIC Teaming (load balancing and failover)

    The following table lists additional supported network adapters.

    Table 11. Network adapters
    Part
    number
    Feature
    code
    DescriptionMaximum supported
    10 Gb Ethernet
    49Y7910A18YBroadcom NetXtreme II Dual Port 10GBaseT Adapter for IBM System x 3
    42C1820 1637Brocade 10 Gb Dual-port CNA for IBM System x3
    49Y7950A18ZEmulex 10GbE Virtual Fabric Adapter II for IBM System x 3
    49Y7960A2ECIntel X520 Dual Port 10GbE SFP+ Adapter for IBM System x 3
    49Y7970A2EDIntel X540-T2 Dual Port 10GBase-T Adapter for IBM System x 3
    81Y9990A1M4Mellanox ConnectX-2 Dual Port 10GbE Adapter for IBM System x3
    42C1800 5751QLogic 10 Gb Dual Port CNA for IBM System x3
    Gigabit Ethernet
    39Y60661485NetXtreme II 1000 Express Ethernet Adapter6
    90Y9352A2V3Broadcom NetXtreme I Quad Port GbE Adapter for IBM System x6
    90Y9370A2V4Broadcom NetXtreme I Dual Port GbE Adapter for IBM System x6
    42C1780 2995NetXtreme II 1000 Express Dual Port Ethernet Adapter6
    49Y4220 5766NetXtreme II 1000 Express Quad Port Ethernet Adapter6
    49Y4230 5767Intel Ethernet Dual Port Server Adapter I340-T2 for IBM System x6
    49Y4240 5768Intel Ethernet Quad Port Server Adapter I340-T4 for IBM System x6
    42C1750 2975PRO/1000 PF Server Adapter by Intel6

    For more information, see the list of IBM Redbooks Product Guides in the Networking adapters category:
    http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=networkadapters

    Storage host bus adapters

    The following table lists storage HBAs supported by the x3400 M3 server.

    Table 12. Storage adapters

    Part
    number
    Feature
    code
    DescriptionMaximum
    quantity supported
    Fibre Channel
    59Y1987 3885Brocade 4 Gb FC Single-port HBA for IBM System x3
    59Y1993 3886Brocade 4 Gb FC Dual-port HBA for IBM System x3
    46M6049 3589Brocade 8 Gb FC Single-port HBA for IBM System x3
    46M6050 3591Brocade 8 Gb FC Dual-port HBA for IBM System x3
    81Y1668A2XUBrocade 16Gb FC Single-port HBA for IBM System x 3
    81Y1675A2XVBrocade 16Gb FC Dual-port HBA for IBM System x3
    42C2069 1698Emulex 4 Gbps FC Single-Port PCI-e HBA for IBM System x6
    42C2071 1699Emulex 4 Gbps FC Dual-Port PCI-e HBA for IBM System x6
    42D0485 3580Emulex 8 Gb FC Single-port HBA for IBM System x6
    42D0494 3581Emulex 8 Gb FC Dual-port HBA for IBM System x6
    81Y1655A2W5Emulex 16Gb FC Single-port HBA for IBM System x 3
    81Y1662A2W6Emulex 16Gb FC Dual-port HBA for IBM System x3
    39R6525 3567QLogic 4 Gb FC Single-Port PCIe HBA for IBM System x6
    39R6527 3568QLogic 4 Gb FC Dual-Port PCIe HBA for IBM System x6
    42D0501 3578QLogic 8 Gb FC Single-port HBA for IBM System x6
    42D0510 3579QLogic 8 Gb FC Dual-port HBA for IBM System x6
    00Y3337A3KWQLogic 16Gb FC Single-port HBA for IBM System x3
    00Y3341A3KXQLogic 16Gb FC Dual-port HBA for IBM System x3
    Converged Network Adapters (CNA)*
    42C1800 5751QLogic 10 Gb Dual Port CNA for IBM System x3
    42C1820 1637Brocade 10 Gb Dual-port CNA for IBM System x3
    iSCSI
    39Y6146 2976QLogic iSCSI Single-Port PCIe HBA for IBM System x6
    42C1770 2977QLogic iSCSI Dual-Port PCIe HBA for IBM System x6
    SAS
    44E8700 3583IBM 3 Gb SAS HBA v23
    46M09075982IBM 6 Gb SAS HBA Controller3
    46M09123876IBM 6Gb Performance Optimized HBA1
    * Converged Network Adapters require SFP+ optical transceivers or DAC cables that must be purchased separately.

    For more information, see the list of IBM Redbooks Product Guides in the Host bus adapters category:
    http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=hba

    PCIe SSD adapters

    The server does not support High IOPS SSD adapters.

    Power supplies

    The server supports either one 670 W AC fixed power supply or up to two 920 W AC hot-swap redundant power supplies, providing N+N redundancy. Standard models come with one power supply, either fixed or hot-swap, depending on the model as listed in Table 2. For models with one 920 W AC hot-swap redundant power supply, you can add a second power supply by ordering the option listed in the following table.

    Note: If the server has a 670 W fixed power supply installed, then only up to four 3.5-inch drives can be installed or up to eight 2.5-inch drives can be installed.

    Table 13. Power supplies

    Part numberFeature codeDescriptionMaximum supported
    44X03815056IBM Redundant Power Supply for x3400/35002 (One power supply comes
    standard with every model.)

    The power supply ships without a line cord. A line cord must be ordered separately (country-specific).

    Note: Power supply option 44X0381 is for both the x3400 M3 and the x3500 M3. The power supply option includes three fans however these fans are only for use with the x3500 M3. They are not used in the x3400 M3. (The x3400 M3 includes physical space for the fans but there is no electrical connection for the fans in the x3400 M3.)

    Integrated virtualization

    The server supports VMware ESXi installed on a USB memory key. The key is installed in a USB socket inside the server. The following table lists the virtualization options.

    Table 14. Virtualization options

    Part
    number
    Feature
    code
    DescriptionMaximum
    supported
    41Y82781776IBM USB Memory Key for VMware ESXi 41
    41Y82873033IBM USB Memory Key for VMware ESXi 4.11
    41Y8296A1NPIBM USB Memory Key for VMware ESXi 4.1 Update 11
    41Y8300A2VCIBM USB Memory Key for VMware ESXi 5.01
    41Y8307A383IBM USB Memory Key for VMware ESXi 5.0 Update 11
    41Y8311A2R3IBM USB Memory Key for VMware ESXi 5.11

    Remote management

    The server contains IBM Integrated Management Module (IMM), which provides advanced service-processor control, monitoring, and an alerting function. If an environmental condition exceeds a threshold or if a system component fails, the IMM lights LEDs to help you diagnose the problem, records the error in the event log, and alerts you to the problem. Optionally, the IMM also provides a virtual presence capability for remote server management capabilities.

    The IMM provides remote server management through industry-standard interfaces:

    • Intelligent Platform Management Interface (IPMI) Version 2.0
    • Simple Network Management Protocol (SNMP) Version 3
    • Common Information Model (CIM)
    • Web browser

    The optional virtual media key is required to enable the remote presence and blue-screen capture features. The remote presence feature provides the following functions:
    • Remotely viewing video with graphics resolutions up to 1280x1024 at 75 Hz, regardless of the system state
    • Remotely accessing the server using the keyboard and mouse from a remote client
    • Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server
    • Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive

    The blue-screen capture feature captures the video display contents before the IMM restarts the server when the IMM detects an operating system hang condition. A system administrator can use the blue-screen capture to assist in determining the cause of the hang condition. The following table lists the remote management option.

    Table 15. Remote management option
    Part numberFeature
    code
    DescriptionMaximum
    supported
    46C75275891IBM Virtual Media Key For Entry Systems1

    Supported operating systems

    The server supports the operating systems listed in this section.

    • Microsoft Windows Essential Business Server 2008 Premium Edition
    • Microsoft Windows Essential Business Server 2008 Standard Edition
    • Microsoft Windows Server 2003, Web Edition
    • Microsoft Windows Server 2003/2003 R2, Datacenter Edition
    • Microsoft Windows Server 2003/2003 R2, Datacenter x64 Edition
    • Microsoft Windows Server 2003/2003 R2, Enterprise Edition
    • Microsoft Windows Server 2003/2003 R2, Enterprise x64 Edition
    • Microsoft Windows Server 2003/2003 R2, Standard Edition
    • Microsoft Windows Server 2003/2003 R2, Standard x64 Edition
    • Microsoft Windows Server 2008 R2
    • Microsoft Windows Server 2008, Datacenter x64 Edition
    • Microsoft Windows Server 2008, Datacenter x86 Edition
    • Microsoft Windows Server 2008, Enterprise x64 Edition
    • Microsoft Windows Server 2008, Enterprise x86 Edition
    • Microsoft Windows Server 2008, Standard x64 Edition
    • Microsoft Windows Server 2008, Standard x86 Edition
    • Microsoft Windows Server 2008, Web x64 Edition
    • Microsoft Windows Server 2008, Web x86 Edition
    • Microsoft Windows Server 2012
    • Microsoft Windows Small Business Server 2003/2003 R2 Premium Edition
    • Microsoft Windows Small Business Server 2003/2003 R2 Standard Edition
    • Microsoft Windows Small Business Server 2008 Premium Edition
    • Microsoft Windows Small Business Server 2008 Standard Edition
    • Red Hat Enterprise Linux 4 AS for AMD64/EM64T
    • Red Hat Enterprise Linux 4 ES for AMD64/EM64T
    • Red Hat Enterprise Linux 4 WS/HPC for AMD64/EM64T
    • Red Hat Enterprise Linux 5 Server Edition
    • Red Hat Enterprise Linux 5 Server Edition with Xen
    • Red Hat Enterprise Linux 5 Server with Xen x64 Edition
    • Red Hat Enterprise Linux 5 Server x64 Edition
    • Red Hat Enterprise Linux 6 Server Edition
    • Red Hat Enterprise Linux 6 Server x64 Edition
    • SUSE LINUX Enterprise Server 10 for AMD64/EM64T
    • SUSE LINUX Enterprise Server 10 for x86
    • SUSE LINUX Enterprise Server 10 with Xen for AMD64/EM64T
    • SUSE LINUX Enterprise Server 11 for AMD64/EM64T
    • SUSE LINUX Enterprise Server 11 for x86
    • SUSE LINUX Enterprise Server 11 with Xen for AMD64/EM64T
    • VMware ESX 4.0
    • VMware ESX 4.1
    • VMware ESXi 4.0
    • VMware ESXi 4.1
    • VMware vSphere 5
    • VMware vSphere 5.1

    See the IBM ServerProven® website for the latest information about the specific versions and service levels supported and any other prerequisites:
    http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/nos/matrix.shtml

    Physical and electrical specifications

    Tower:

    • Width: 218.0 mm (8.6 in)
    • Depth: 767.0 mm (30.2 in)
    • Height: 440.0 mm (17.3 in)
    • Weight:
      • 27.10 kg (59.7 lb) (minimum configuration)
      • 37.85 kg (83.4 lb) (maximum configuration)

    Rack (using the Tower-to-Rack Conversion Kit, 69Y0893):
    • Width: 424.0 mm (16.7 in)
    • Depth: 702.0 mm (27.6 in)
    • Height: 218.0 mm (8.6 in)
    • Weight:
      • 25.80 kg (56.9 lb) (minimum configuration)
      • 36.00 kg (79.3 lb) (maximum configuration)

    Supported environment:
    • Air temperature
      • Server on: 10 - 35° C (50 - 95° F); altitude: 0 - 915 m (3,000 ft)
      • Server on: 10 - 32° C (50 - 90° F); altitude: 915 m (3,000 ft) - 2,134 m (7,000 ft)
      • Server off: 5 - 45° C (41 - 113° F)
      • Shipment: -40 - 60° C (-40 - 140° F)
    • Humidity
      • Server on: 20 - 80%; maximum dew point 21° C; maximum rate of change 5° C/hr
      • Server off: 8 - 80%; maximum dew point 27° C
    • Electrical
      • 100 to 240 V ac; 50 - 60 Hz; 10 - 5 A
      • Input kilovolt-amperes (kVA) (approximately):
        • Minimum configuration: 0.60 kVA
        • Maximum configuration: 0.82 kVA
    • Btu output
      • Ship configuration: 2013 Btu/hr (590 watts)
      • Full configuration: 2788 Btu/hr (817 watts)
    • Acoustical noise emission levels:
      • 5.5 bels (idling)
      • 6.0 bels (operating)

    Warranty options

    The IBM System x3400 M3 has a 1-year (7378) or 3-year (7379) onsite warranty with 9x5/next-business-day terms. IBM offers the warranty service upgrades through IBM ServicePacs, discussed in this section. The IBM ServicePac is a series of prepackaged warranty maintenance upgrades and post-warranty maintenance agreements with a well-defined scope of services, including service hours, response time, term of service, and service agreement terms and conditions.

    IBM ServicePac offerings are country-specific, that is, each country might have its own service types, service levels, response times, and terms and conditions. Not all covered types of ServicePacs might be available in a particular country. For more information about IBM ServicePac offerings available in your country, see the IBM ServicePac Product Selector at:
    https://www-304.ibm.com/sales/gss/download/spst/servicepac

    The following table explains warranty service definitions in more detail.

    Table 16. Warranty service definitions

    TermDescription
    IBM onsite repair (IOR)A service technician will come to the server's location for equipment repair.
    24x7x2 hourA service technician is scheduled to arrive at your customer’s location within two hours after remote problem determination is completed. We provide service around the clock, every day, including IBM holidays.
    24x7x4 hourA service technician is scheduled to arrive at your customer’s location within four hours after remote problem determination is completed. We provide service around the clock, every day, including IBM holidays.
    9x5x4 hourA service technician is scheduled to arrive at your customer’s location within four business hours after remote problem determination is completed. We provide service from 8:00 a.m. to 5:00 p.m. in the customer's local time zone, Monday through Friday, excluding IBM holidays. If after 1:00 p.m. it is determined that onsite service is required, the customer can expect the service technician to arrive the morning of the following business day. For noncritical service requests, a service technician will arrive by the end of the following business day.
    9x5 next business dayA service technician is scheduled to arrive at your customer’s location on the business day after we receive your call, following remote problem determination. We provide service from 8:00 a.m. to 5:00 p.m. in the customer's local time zone, Monday through Friday, excluding IBM holidays.

    In general, the types of IBM ServicePacs are:
    • Warranty and maintenance service upgrades
      • One, 2, 3, 4, or 5 years of 9x5 or 24x7 service coverage
      • Onsite repair from next business day to 4 or 2 hours
      • One or 2 years of warranty extension
    • Remote technical support services
      • One or three years with 24x7 coverage (severity 1) or 9x5/next business day for all severities
      • Installation and startup support for System x servers
      • Remote technical support for System x servers
      • Software support - Support Line
        • Microsoft or Linux software
        • VMware
        • IBM Systems Director

    Regulatory compliance

    The server conforms to the following international standards:

    • FCC - Verified to comply with Part 15 of the FCC Rules, Class A
    • Canada ICES-003, issue 4, Class A
    • UL/IEC 60950-1
    • CSA C22.2 No. 69950-1-03
    • NOM-019
    • Argentina IEC60950-1
    • Japan VCCI, Class A
    • Australia/New Zealand AS/NZS CISPR 22:2006, Class A
    • IEC-60950-1:2001 (CB Certificate and CB Test Report)
    • Taiwan BSMI CNS 13438, Class A; CNS 14336
    • China CCC (4943-2001), GB 9254-2008 Class A, GB 17625.1:2003
    • Korea KN22, Class A; KN24
    • Russia/GOST ME01, IEC-60950-1, GOST R 51318.22-99, GOST R 51318.24-99, GOST R 51317.3.2-2006, GOST R 51317.3.3-99
    • IEC 60950-1 (CB Certificate and CB Test Report)
    • CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3)
    • CISPR 22, Class A
    • TUV-GS (EN60950-1 /IEC60950-1,EK1-ITB2000)


    External disk storage expansion

    The external disk storage expansion enclosures listed in the following table are available.

    Table 17. External storage expansion enclosures

    Part numberDescriptionMaximum quantity
    supported per one M5025
    172701XIBM System Storage® EXP300018 (9 per port)
    174712XIBM System Storage EXP2512 Express18 (9 per port)
    174724XIBM System Storage EXP2524 Express9 (9 per port)
    17226xxIBM TotalStorage DS4300 Midrange Disk Systems (all models) -
    17429xxIBM TotalStorage DS4500 Midrange Disk System (all models)-
    1746A2DIBM System Storage DS3512 Express Dual Controller Storage System-
    1746A2SIBM System Storage DS3512 Express Single Controller Storage System-
    1746A4DIBM System Storage DS3524 Express Dual Controller Storage System-
    1746A4SIBM System Storage DS3524 Express Single Controller Storage System-

    The hard disk drives listed in the following table are supported with external expansion enclosures.

    Table 18. Hard drive options for external expansion enclosures
    Part numberDescriptionMaximum quantity supported
    per one enclosure
    EXP3000 Hot-Swap SATA 3.5" hard drives
    43W7630IBM 1 TB 7200 Dual Port SATA 3.5" Hot-Swap HDD12
    49Y1940IBM 2 TB 7200 Dual Port SATA 3.5'' Hot-Swap HDD12
    EXP3000 Hot-Swap SAS 3.5" hard drives
    44W2234IBM 300 GB 15 K 6 Gbps SAS 3.5" Hot-Swap HDD12
    44W2239IBM 450 GB 15 K 6 Gbps SAS 3.5" Hot-Swap HDD12
    44W2244IBM 600 GB 15 K 6 Gbps SAS 3.5" Hot-Swap HDD12
    EXP2512 Hot-Swap SAS 3.5" hard drives
    49Y1899300 GB 15 K 6 Gb SAS 3.5" HDD12
    49Y1900450 GB 15 K 6 Gb SAS 3.5" HDD12
    49Y1901600 GB 15 K 6 Gb SAS 3.5" HDD12
    49Y19031 TB 7,200 RPM 6 Gb SAS NL 3.5" HDD12
    49Y19022 TB 7,200 RPM 6 Gb SAS NL 3.5" HDD12
    EXP2524 Hot-Swap SAS 2.5" hard drives
    49Y1896146 GB 15 K 6 Gb SAS 2.5” HDD24
    49Y1895300 GB 10 K 6 Gb SAS 2.5” HDD24
    81Y9596600 GB 10 K 6 Gb SAS 2.5” HDD24
    49Y1898500 GB 7,200 RPM 6 Gb SAS NL 2.5” HDD24

    The RAID controllers listed in the following table are supported with external expansion enclosures.

    Table 19. RAID controllers for external storage expansion enclosures
    Part numberDescriptionMaximum quantity
    supported
    46M0830 ServeRAID M5025 SAS/SATA Controller3
    46M0930 ServeRAID M5000 Series Advance Feature Key†1 per one M5025
    81Y4426ServeRAID M5000 Series Performance Accelerator Key†1 per one M5025
    † Only one key is supported in each controller, either the Advance Feature Key or the Performance Accelerator Key.

    The ServeRAID M5025 SAS/SATA Controller has the following specifications:
    • Two Mini-SAS external connectors
    • Supports RAID levels 0, 1, 5, 10, and 50
    • Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
    • Performance optimization for drives with optional M5000 Series Performance Accelerator Key
    • 6 Gbps throughput per port
    • PCI Express 2.0 x8 host interface
    • Based on the LSI SAS2108 6 Gbps ROC controller
    • 512 MB of onboard cache
    • Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention
    • Supports connectivity to the EXP3000, EXP2512, and EXP2524 storage expansion enclosures

    For more information, see the ServeRAID M5025 SAS/SATA Controller for IBM System x at-a-glance guide: http://www.redbooks.ibm.com/abstracts/tips0739.html?Open

    The external SAS cables listed in the following table are supported with external expansion enclosures and M5025 RAID controllers.

    Table 20. External SAS cables for external storage expansion enclosures
    Part numberDescriptionMaximum quantity
    supported per enclosure*
    39R6531IBM 3 m SAS Cable1
    39R6529IBM 1 m SAS Cable1
    * The EXP3000 and EX2500 series can be chained with each other. In such a case, one cable is used to connect first EXP25xx or EXP3000 to the RAID controller, and every consecutive EXP unit is connected to the previous one by one cable.

    External disk storage systems

    The following table lists the external storage systems that are supported by the server and can be ordered through System x sales channel. The server may support other IBM disk systems that are not listed in this table. Refer to IBM System Storage Interoperability Center for further information, http://www.ibm.com/systems/support/storage/ssic.

    Table 21. External disk storage systems

    Part numberDescription
    1746A2D IBM System Storage DS3512 Express Dual Controller Storage System
    1746A2S IBM System Storage DS3512 Express Single Controller Storage System
    1746A4D IBM System Storage DS3524 Express Dual Controller Storage System
    1746A4S IBM System Storage DS3524 Express Single Controller Storage System
    181494HIBM System Storage DS3950 Model 94
    181498HIBM System Storage DS3950 Model 98
    181492HIBM System Storage EXP395 Expansion Unit
    1746A2EIBM System Storage EXP3512 Express Storage™ Expansion Unit
    1746A4EIBM System Storage EXP3524 Express Storage Expansion Unit

    For more information, see the list of IBM Redbooks Product Guides in the Storage Systems category:
    http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=externalstorage

    External backup units

    The server supports the external backup attachment options listed in the following table.

    Table 22. External backup options

    Part numberDescription
    External tape expansion enclosures for internal tape drives
    87651UX1U Tape Drive Enclosure
    8767HHXHalf High Tape Drive Enclosure
    87651NX1U Tape Drive Enclosure (with Nema 5-15P LineCord)
    8767HNXHalf High Tape Drive Enclosure (with Nema 5-15P LineCord)
    Tape enclosure adapters (with cables)
    44E8869USB Enclosure Adapter Kit
    40K2599SAS Enclosure Adapter Kit
    Internal backup drives supported by external tape enclosures
    46C5364 IBM RDX Removable Hard Disk Storage System - Internal USB 160 GB Bundle
    46C5387 IBM RDX Removable Hard Disk Storage System - Internal USB 320 GB Bundle
    46C5388 IBM RDX Removable Hard Disk Storage System - Internal USB 500 GB Bundle
    46C5399IBM DDS Generation 5 USB Tape Drive
    39M5636 IBM DDS Generation 6 USB Tape Drive
    43W8478IBM Half High LTO Gen 3 SAS Tape Drive
    44E8895IBM Half High LTO Gen 4 SAS Tape Drive
    49Y9898IBM Half High LTO Gen 5 Internal SAS Tape Drive
    External backup units*
    362516XIBM RDX Removable Hard Disk Storage System - External USB 160 GB Bundle
    362532XIBM RDX Removable Hard Disk Storage System - External USB 320 GB Bundle
    362550XIBM RDX Removable Hard Disk Storage System - External USB 500 GB Bundle
    3628L3XIBM Half High LTO Gen 3 External SAS Tape Drive (with US line cord)
    3628L4XIBM Half High LTO Gen 4 External SAS Tape Drive (with US line cord)
    3628L5X IBM Half High LTO Gen 5 External SAS Tape Drive (with US line cord)
    3628N3XIBM Half High LTO Gen 3 External SAS Tape Drive (without line cord)
    3628N4XIBM Half High LTO Gen 4 External SAS Tape Drive (without line cord)
    3628N5XIBM Half High LTO Gen 5 External SAS Tape Drive (without line cord)
    3580S3VSystem Storage TS2230 Tape Drive Express Model H3V
    3580S4VSystem Storage TS2240 Tape Drive Express Model H4V
    3580S5ESystem Storage TS2250 Tape Drive Express Model H5S
    3580S5XSystem Storage TS2350 Tape Drive Express Model S53
    3572S4RTS2900 Tape Library with LTO4 HH SAS drive & rack mount kit
    3572S5RTS2900 Tape Library with LTO5 HH SAS drive & rack mount kit
    35732ULTS3100 Tape Library Model L2U Driveless
    35734ULTS3200 Tape Library Model L4U Driveless
    46X2682†LTO Ultrium 5 Fibre Channel Drive
    46X2683†LTO Ultrium 5 SAS Drive Sled
    46X2684†LTO Ultrium 5 Half High Fibre Drive Sled
    46X2685†LTO Ultrium 5 Half High SAS Drive Sled
    46X6912†LTO Ultrium 4 Half High Fibre Channel Drive Sled
    46X7117†LTO Ultrium 4 Half High SAS DriveV2 Sled
    46X7122†LTO Ultrium 3 Half High SAS DriveV2 Sled
    * Note: The external tape drives listed can be ordered through System x sales channel. Server may support other IBM tape drives that are not listed in this table. Refer to IBM System Storage Interoperability Center for further information.
    † Note: These part numbers are the tape drives options for 35732UL and 35734UL.

    For more information, see the list of IBM Redbooks Product Guides in the Backup units category:
    http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=tape

    Top-of-rack Ethernet switches

    The server supports the following top-of-rack Ethernet switches from IBM System Networking.
    Table 23. IBM System Networking - Top-of-rack switches

    Part numberDescription
    IBM System Networking - 1 Gb top-of-rack switches
    0446013IBM System Networking RackSwitch G8000R
    7309CFCIBM System Networking RackSwitch G8000F
    7309CD8IBM System Networking RackSwitch G8000DC
    7309G52IBM System Networking RackSwitch G8052R
    730952FIBM System Networking RackSwitch G8052F
    427348EIBM Ethernet Switch J48E
    6630010Juniper Networks EX2200 24 Port
    6630011Juniper Networks EX2200 24 Port with PoE
    6630012Juniper Networks EX2200 48 Port
    6630013Juniper Networks EX2200 48 Port with PoE
    IBM System Networking - 10 Gb top-of-rack switches
    7309DRXIBM System Networking RackSwitch G8264CS (Rear to Front)
    7309DFXIBM System Networking RackSwitch G8264CS (Front to Rear)
    7309BD5IBM System Networking RackSwitch G8124DC
    7309BR6IBM System Networking RackSwitch G8124ER
    7309BF7IBM System Networking RackSwitch G8124EF
    7309G64IBM System Networking RackSwitch G8264R
    730964FIBM System Networking RackSwitch G8264F
    7309CR9IBM System Networking RackSwitch G8264TR
    7309CF9IBM System Networking RackSwitch G8264TF
    0719410Juniper Networks EX4500 - Front to Back Airflow
    0719420Juniper Networks EX4500 - Back to Front Airflow
    IBM System Networking - 40 Gb top-of-rack switches
    8036ARXIBM System Networking RackSwitch G8316R
    8036AFXIBM System Networking RackSwitch G8316F

    For more information, see the list of IBM Redbooks Product Guides in the Top-of-rack switches category:
    http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=tor

    Uninterruptible power supply units

    The server supports attachments to the uninterruptible power supply (UPS) units listed in the following table.

    Table 24. Uninterruptible power supply units

    Part numberDescription
    Rack-mounted UPS
    21304RX IBM UPS 10000XHV
    53951AXIBM 1500VA LCD 2U Rack UPS (100V/120V)
    53951KXIBM 1500VA LCD 2U Rack UPS (230V)
    53952AXIBM 2200VA LCD 2U Rack UPS (100V/120V)
    53952KXIBM 2200VA LCD 2U Rack UPS (230V)
    53953AX IBM 3000VA LCD 3U Rack UPS (100 V/120 V)
    53953JX IBM 3000VA LCD 3U Rack UPS (200 V/208 V)
    53956AX IBM 6000VA LCD 4U Rack UPS (200 V/208 V)
    53956KX IBM 6000VA LCD 4U Rack UPS (230 V)

    For more information, see the following at-a-glance guides:

    Power distribution units

    The server supports attachments to the power distribution units (PDUs) listed in the following table.

    Table 25. Power distribution units

    Part numberDescription
    Switched and Monitored PDUs
    46M4002 IBM 1U 9 C19/3 C13 Active Energy Manager DPI® PDU
    46M4003 IBM 1U 9 C19/3 C13 Active Energy Manager 60A 3 Phase PDU
    46M4004 IBM 1U 12 C13 Active Energy Manager DPI PDU
    46M4005 IBM 1U 12 C13 Active Energy Manager 60A 3 Phase PDU
    46M4167IBM 1U 9 C19/3 C13 Switched and Monitored 30A 3 Phase PDU
    46M4116IBM 0U 24 C13 Switched and Monitored 30A PDU
    46M4119IBM 0U 24 C13 Switched and Monitored 32A PDU
    46M4134IBM 0U 12 C19/12 C13 Switched and Monitored 50A 3 Phase PDU
    46M4137IBM 0U 12 C19/12 C13 Switched and Monitored 32A 3 Phase PDU
    Enterprise PDUs
    71762MX IBM Ultra Density Enterprise PDU C19 PDU+ (WW)
    71762NX IBM Ultra Density Enterprise PDU C19 PDU (WW)
    71763MU IBM Ultra Density Enterprise PDU C19 3 phase 60A PDU+ (NA)
    71763NU IBM Ultra Density Enterprise PDU C19 3 phase 60A PDU (NA)
    39M2816 IBM DPI C13 Enterprise PDU without linecord
    39Y8923 DPI 60A Three Phase C19 Enterprise PDU with IEC309 3P+G (208 V) fixed line cord
    39Y8941 DPI Single Phase C13 Enterprise PDU without line cord
    39Y8948 DPI Single Phase C19 Enterprise PDU without line cord
    Front-End PDUs
    39Y8934DPI 32amp/250V Front-end PDU with IEC 309 2P+Gnd connector
    39Y8935DPI 63amp/250V Front-end PDU with IEC 309 2P+Gnd connector
    39Y893830amp/125V Front-end PDU with NEMA L5-30P connector
    39Y893930amp/250V Front-end PDU with NEMA L6-30P connector
    39Y894060amp/250V Front-end PDU with IEC 309 60A 2P+N+Gnd connector
    Universal PDUs
    39Y8951DPI Universal Rack PDU w/ US LV and HV line cords
    39Y8952DPI Universal Rack PDU w/ CEE7-VII Europe LC
    39Y8953DPI Universal Rack PDU w/ Denmark LC
    39Y8954DPI Universal Rack PDU w/ Israel LC
    39Y8955 DPI Universal Rack PDU w/Italy LC
    39Y8956DPI Universal Rack PDU w/South Africa LC
    39Y8957DPI Universal Rack PDU w/UK LC
    39Y8958DPI Universal Rack PDU with AS/NZ LC
    39Y8959DPI Universal Rack PDU w/China LC
    39Y8962DPI Universal Rack PDU (Argentina)
    39Y8960DPI Universal Rack PDU (Brazil)
    39Y8961DPI Universal Rack PDU (India)
    0U Basic PDUs
    46M4122IBM 0U 24 C13 16A 3 Phase PDU
    46M4125 IBM 0U 24 C13 30A 3 Phase PDU
    46M4128 IBM 0U 24 C13 30A PDU
    46M4131IBM 0U 24 C13 32A PDU
    46M4140 IBM 0U 12 C19/12 C13 60A 3 Phase PDU
    46M4143IBM 0U 12 C19/12 C13 32A 3 Phase PDU

    Rack cabinets

    The server supports the rack cabinets listed in the following table. Tower-to-Rack Conversion Kit (part number 69Y0893, 5Ux26" Tower to Rack Conversion Kit for x3400/x3500) is required for the server to be installed in a rack.

    Table 26. Rack cabinets

    Part numberDescription
    69Y08935Ux26" Tower to Rack Conversion Kit for x3400/x3500
    201886XIBM 11U Office Enablement Kit
    14102RXIBM eServer Cluster 25U Rack
    93072PX IBM 25U Static S2 Standard Rack
    93072RX IBM 25U Standard Rack
    93074RX IBM 42U Standard Rack
    93074XX IBM 42U Standard Rack Extension
    14104RXIBM 42U S2 standard rack
    93084EX IBM 42U Enterprise Expansion Rack
    93084PX IBM 42U Enterprise Rack
    93604EX IBM 42U 1200 mm Deep Dynamic Expansion Rack
    93604PX IBM 42U 1200 mm Deep Dynamic Rack
    93614EX IBM 42U 1200 mm Deep Static Expansion Rack
    93614PX IBM 42U 1200 mm Deep Static Rack
    93624EX IBM 47U 1200 mm Deep Static Expansion Rack
    93624PX IBM 47U 1200 mm Deep Static Rack

    For more information, see the IBM 47U and 42U 1200mm Deep Racks at-a-glance guide, available from:
    http://www.redbooks.ibm.com/abstracts/tips0796.html?Open

    Rack options

    The server supports the rack console switches and monitor kits listed in the following table.

    Table 27. Rack options

    Part numberFeature codeDescription
    Monitor kits and keyboard trays
    172317X1723HC1 fc 00511U 17in Flat Panel Console Kit
    172319X1723HC1 fc 00521U 19in Flat Panel Console Kit
    Console switches
    1754D2X1754HC2 fc 6695IBM Global 4x2x32 Console Manager (GCM32)
    1754D1X1754HC1 fc 6694IBM Global 2x2x16 Console Manager (GCM16)
    1754A2X1754HC4 fc 0726IBM Local 2x16 Console Manager (LCM16)
    1754A1X1754HC3 fc 0725IBM Local 1x8 Console Manager (LCM8)
    Console cables
    43V61473757IBM Single Cable USB Conversion Option (UCO)
    39M28953756IBM USB Conversion Option (4 Pack UCO)
    39M28973754IBM Long KVM Conversion Option (4 Pack Long KCO)
    46M53835341IBM Virtual Media Conversion Option Gen2 (VCO2)
    46M53825340IBM Serial Conversion Option (SCO)

    For more information, see the following IBM Redbooks at-a-glance guides:


    IBM Global Financing

    IBM Global Financing can help you obtain the IT solution you need while preserving funding for other strategic investments and optimizing cash flow. Our Fair Market Value (FMV) lease helps ensure that you have the latest IBM technology and with our mid-lease upgrade capability, you can increase the capacity of the system with little to no change in monthly payments. At the end of the lease, take advantage of our flexible end-of-lease options to fit your changing business needs. IBM Global Financing has the breadth and depth of offerings, longevity, proven success and global reach to help you develop a robust financing and asset management strategy that provides you the opportunity to leverage new technologies and turn your ambitious vision into a tangible solution.

    Here are some other reasons why working with us makes solid financial sense:

    • Expand your purchasing power—Affordable monthly payments allow you to change the technology acquisition discussion from “what can I afford right now” to “what solution is really right for my business.” IBM Global Financing allows you to expand your purchase power to get you the right solution.
    • Accelerate your project’s cash flow break-even point—Acquire your IBM technology today and begin to realize its benefits now. An FMV lease can help you get the solution you need now, with low monthly payments that better align upfront costs with the anticipated return on investment from the technology.
    • Easy to acquire with affordable rates—We offer one-stop shopping for a total IT solution, so you can acquire IBM hardware, software, services and the financing you need—from one IT provider.

    Plus, we provide simple, easy-to-understand contracts and quick approvals. As the world’s largest IT financing provider, with an asset base of US$35.8 billion and over 125,000 customers, IBM Global Financing offers highly competitive rates that promote low total cost of ownership and low monthly payments.

    IBM Global Financing operates in more than 50 countries. Go to http://ibm.com/financing for financing options in your country and to contact a local financing specialist.

    IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government clients. Rates and availability subject to client’s credit rating, financing terms, offering type, equipment and product type and options, and may vary by country. Non-hardware items must be one-time, non-recurring charges and are financed by means of loans. Other restrictions may apply. Rates and offerings are subject to change, extension or withdrawal without notice and may not be available in all countries. Please contact your local IBM Global Financing representative for additional detail.

    Related publications and links

    For more information see the following resources:


    Special Notices

    This material has not been submitted to any formal IBM test and is published AS IS. It has not been the subject of rigorous review. IBM assumes no responsibility for its accuracy or completeness. The use of this information or the implementation of any of these techniques is a client responsibility and depends upon the client's ability to evaluate and integrate them into the client's operational environment. publib-b.boulder.ibm.com

    Profile

    Publish Date
    15 February 2011

    Last Update
    06 June 2013


    Rating:
    (based on 1 review)


    Author(s)

    IBM Form Number
    TIPS0808