This discussion is now locked
Posted by Mr. Armin Gaiser on 19 March 2010 at 4:22
PDF not readable after download
Posted by Mr. Patrik Hyský on 19 March 2010 at 15:06
@Armin, problem is on your end, the PDF is fine.
Posted by torbjörn appehl on 5 April 2010 at 14:56
OMG! IBM i is almost totaly forgotten.. I really hope It's taken care of until release. The book was listed on the "System i" side on redbooks.com..
Posted by Mr. L.R Jeyakumar on 22 April 2010 at 13:58
Page 72. found
POWER5 270, 820, 830, 840,
Its actually a POWER4 servers ,need correction
Posted by Mark Drummond on 14 May 2010 at 8:35
"Each card houses two POWER7
processors" should read "Each card houses one POWER7
Posted by Mark Drummond on 14 May 2010 at 8:53
Page 13: The streams are crossed!
The lines for memory channels B, C, and D should be distinct. The image makes it appear as though these three memory channels are somehow connected.
Posted by Scott Vetter on 17 May 2010 at 15:04
@Mark Good eyes. The lines *were* unique, but as you pointed out overlapping. The next update wil have the updated image and the single POWER7 per card update.
Posted by Mr. Jonathan Follows on 27 May 2010 at 3:29
Pages 28 & 29, section 2.1.1
You have given the POWER7 processor rather a lot of L2 cache.
I think "256 MB" should read "256 kB" in 2.1.1 and in table 2-1 shouldn't it?
$ lsattr -El L2cache0
size 256 Size of L2 cache in Kbytes False
Posted by C Colonnese on 10 July 2010 at 19:51
The RAID section is incomplete and not clear. Please expand the internal RAID discussion, FC 5923, etc.
Posted by jun zhang on 8 December 2010 at 8:08
The book still was listed on the "System i" side on redbooks.com, it's true? :-)
Posted by Scott Vetter on 13 December 2010 at 7:29
Thanks for the comment. Since these systems support System i and System p, we had them put on those lists. I've updated the list so it is just Power Systems to avoid confusion.